Construction Management and Engineering
This is an archived copy of the 2018-19 catalog. To access the most recent version of the catalog, please visit http://bulletin.ndsu.edu.
Programs
The Department of Construction Management and Engineering offers three separate and distinct graduate programs as listed below..
Master of Science (M.S.) in Construction Management
The Master of Science in Construction Management program is an on-campus, research-focused degree. Students are expected to significantly contribute to the development and delivery of scholarly publications and to the development and submission of research grant proposals as determined by the major adviser.
Master of Construction Management
The Master of Construction Management program is an online professional program consisting of 30 credits of course work and the Associate Constructor (AC) Exam.
Graduate Certificate in Construction Management
The Graduate Certificate in Construction Management program provides an online course learning experience constituting a distinct knowledge-base and a specific set of associated skills within the areas of estimating, scheduling, and project management at the graduate level. These three areas constitute a body of knowledge that represents the fundamental core of construction management.
Master of Science (M.S.) in Construction Management
In addition to the Graduate School requirements, to be admitted into the Master of Science in Construction Management applicants must:
- Have earned a baccalaureate degree in construction, engineering, architecture, or other related discipline with a minimum CGPA of 3.0 or equivalent to attain full standing.
- Submit an official transcript for each college/university attended.
- Submit Graduate Record Examination (GRE) score.
- Submit a one-page “Statement of Purpose” outlining reasons for pursuing the Master of Science in Construction Management, emphasizing on research objectives and qualifications that directly relate to one of the “Research Interests” of the CM&E faculty.
- Submit a two-page resume.
- Submit three (3) letters of recommendation.
Prospective students must submit application materials directly to the NDSU Graduate School via the online application process.
Financial Assistance
For exceptional applicants, the CM&E Department may offer a graduate assistantship, which consists of a monetary stipend and a possible tuition waiver; however, student activity fees and program fees are not waived. There is no separate application process for graduate assistantships. Applicants are evaluated based on their credentials and/or experience.
Master of Construction Management (MCONSM)
In addition to the Graduate School requirements, to be admitted into the Master of Construction Management, applicants must:
- Have earned a baccalaureate degree in construction, engineering, architecture, or other related discipline with a minimum CGPA of 3.0 or equivalent to attain full standing.
- Submit an official transcript for each college/university attended.
- Submit a two-page resume.
- Submit a one-page “Statement of Purpose” outlining reasons for pursuing the Master of Construction Management.
- Submit three (3) letters of recommendation.
Prospective students must submit application materials directly to the NDSU Graduate School via the online application process. Applicants who are deficient in the CGPA requirement are encouraged to apply for the Graduate Certificate in Construction Management. Although successful completion of the Graduate Certificate does not guarantee acceptance into the Master of Construction Management, the Graduate Certificate will be seriously considered in application decisions related to the Master of Construction Management Program.
Financial Assistance
Graduate assistantships, tuition waivers, and financial aid offered by the CM&E Department, the Graduate School, or NDSU are not available to students in the Master of Construction Management program.
Graduate Certificate in Construction Management
In addition to the Graduate School requirements, to be admitted into the Graduate Certificate in Construction Management applicants must:
- Have earned a baccalaureate degree in construction, engineering, architecture, or other related discipline with a minimum CGPA of 3.0 or equivalent to attain full standing.
- Submit of an official transcript for each college/university attended.
- Submit a two-page resume.
- Submit a one-page “Statement of Purpose” outlining reasons for pursuing the Graduate Certificate in Construction Management.
- Submit three (3) letters of recommendation.
Prospective students must submit application materials directly to the NDSU Graduate School via the online application process.
Financial Assistance
Graduate Certificate in Construction Management Program students are not eligible for assistantships, tuition waivers, and financial aid offered by the CM&E Department, the Graduate School, or NDSU.
Master of Science in Construction Management
The Master of Science in Construction Management requires a total of 31 graduate-level credits (24 credits of course work, 6 credits of research/thesis, and 1 credit of seminar) and a thesis. The thesis requires the creation and presentation of new knowledge in providing a solution to a problem. Prior to submitting a thesis to the graduate student's supervisory committee, the thesis must be reviewed by a departmentally approved external editor. All costs associated with external review are the responsibility of the graduate student.
An example of the Plan of Study for the Master of Science in Construction Management is shown below:
Code | Title | Credits |
---|---|---|
CM&E 790 | Graduate Seminar | 1 |
CM&E 603 | Scheduling and Project Control | 3 |
CM&E 605 | Construction Support Operations | 3 |
CM&E 701 | Construction Technology and Equipment | 3 |
CM&E 711 | Construction Cost Estimating | 3 |
CM&E 712 | Construction Management | 3 |
600, 700 or 800-level electives * | 9 | |
CM&E 798 | Master's Thesis | 6 |
Total Credits | 31 |
* Electives may be any 600, 700, or 800-level courses offered at NDSU determined by the student and the major faculty adviser. A minimum cumulative grade point average (CGPA) of 3.0 must be achieved in order to complete the M.S. degree.
Master of Construction Management
The Master of Construction Management degree consists of thirty (30) credits of course work and AC Exam. The following ten (10) courses constitute the thirty (30) credits of course work required for the degree.
Code | Title | Credits |
---|---|---|
CM&E 603 | Scheduling and Project Control | 3 |
CM&E 605 | Construction Support Operations | 3 |
CM&E 660 | Infrastructure Management | 3 |
CM&E 701 | Construction Technology and Equipment | 3 |
CM&E 703 | Advanced Project Planning and Control | 3 |
CM&E 711 | Construction Cost Estimating | 3 |
CM&E 712 | Construction Management | 3 |
CM&E 715 | Construction Specifications and Contracts | 3 |
CM&E 725 | Decision Making and Risk Analysis | 3 |
CM&E 740 | Financial and Economic Concepts for Construction Managers | 3 |
Individual Study/Tutorial (ACExam) | ||
Total Credits | 30 |
Schedule of Courses
Summer Semester
CM&E 603 Scheduling and Project Control
CM&E 660 Infrastructure Management
Fall Semester
CM&E 703 Advanced Project Planning and Control
CM&E 712 Construction Management
CM&E 715 Construction Specifications and Contracts
CM&E 740 Financial and Economic Concepts for Construction Managers
Spring Semester
CM&E 605 Construction Support Operations
CM&E 701 Construction Technology and Equipment
CM&E 711 Construction Cost Estimating
CM&E 725 Decision Making and Risk Analysis
Associate Constructor (AC) Exam
The Associate Constructor (AC) Exam is administered by the American Institute of Constructors & Constructor Certification Commission. All students in the Master of Construction Management Program must take the AC Exam before their graduation. There is no requirement that a student has to earn a pass score in order to receive the Master of Construction Management Degree from NDSU. However, students are encouraged to prepare for the AC Exam and earn a pass score or better established by the testing agency. The exam may be taken multiple times. The AC exam is the first level in reaching the designation of a “Certified Professional Constructor” (CPC), which is a three-stage process consisting of the AC exam (Level I), 4-5 years of relevant construction management work experience, and the CPC exam (Level II). The AC Exam is offered twice a year, typically in March and November. International applicants should note that the AC Exam is not offered online and is only offered in the United States. If a student has the AC designation, he/she may take the CPC Exam before the graduation. A pass score also is not required for the CPC Exam..
Graduate Certificate in Construction Management
The certificate program consists of nine credits encompassing the following three (3) courses:
Code | Title | Credits |
---|---|---|
CM&E 603 | Scheduling and Project Control | 3 |
CM&E 711 | Construction Cost Estimating | 3 |
CM&E 712 | Construction Management | 3 |
Only grades of C or higher will satisfy requirements for certificate completion with a CGPA of 3.0 or greater. The Dean of the Graduate School, using official NDSU transcripts, will verify course completion and issue the certificate. Courses used to satisfy the Graduate Certificate requirements cannot be older than three years at the time the certificate completion is verified.
Eric Asa, Ph.D.
Associate Professor and Accreditation Assessment Coordinator
University of Alberta, 2002
Research Interests: Infrastructure and Assets Management, Construction Materials, Engineering Education, Computational Modeling
Zhili (Jerry) Gao, Ph.D., P.E.
Associate Professor and Interim Department Chair
Iowa State University, 2004
Research Interests: Virtual Design and Construction (Visualization, BIM Development And Implantation), Advanced Concrete Techniques (Sustainable Concrete, New Concrete Materials And Structures)
Todd L. Sirotiak, MBA, Ph.D., P.E., C.P.C.
Associate Professor
Iowa State University, 2008
Research Areas: Cost Control, Sustainability, and Engineering Education
Gary R. Smith, Ph.D., P.E.
Professor and Graduate Coordinator
Purdue University, 1986
Research Areas: Quality Control and System Applications, Decision Analysis and Modeling Techniques, Safety Performance Measurement and Improvements, and Process and Productivity Improvement
Matthew L. Stone, Ph.D.
Assistant Professor
University of Alabama, 2013
Research Areas: Cost Estimating, Life Cycle Analysis, and Infrastructure Construction
Huojun Yang, Ph.D.
Assistant Professor
University of Nebraska-Lincoln, 2012
Research Interest: Built Environmental Systems and Building Energy
Yao Yu, Ph.D.
Assistant Professor
North Carolina A&T State University, 2014
Research Areas: Building Energy Conservation Technology, Computational Airflow Modeling, and HVAC System Design and Simulation